WORK FLOORS FOR LIFT AND STAIRCASE SHAFTS
Lift-slabs are platforms within a shaft that are raised in phases. They are mainly used in lift shafts, stairwells, ducts, etc.
APPLICATIONS
TECHNICAL SPECIFICATIONS
Width: from 1700mm – 5000mm
Length: from 1700mm – 5000mm
Lift-slab with hinge bracket
For this lift-slab, a feed-through with a small pipe through which M24 thread passes must be provided for each hinge bracket in a previous phase. The hinge bracket is attached to the wall using a tensioner and nut. The lift-slab beams rest on these folding brackets.
Lift-slab with clapper
For this lift-slab, a recess measuring at least 250 mm high and 150 mm wide must be provided in the wall for each clapper in a previous phase. When the lift-slab is raised, the four clappers will fall into these recesses and rest on them.
Dimensions Lift-slab beams
Lift-slab beam 1475
Width (W):
min. 1700 mm – max. 2600 mm
Length (L):
min. 1700 mm – max. 5000 mm
Lift-slab beam 2475
Width (W):
min. 2500 mm – max. 3500 mm
Length (L):
min. 1700 mm – max. 5000 mm
Lift-slab beam 3000
Width (W):
min. 3500 mm – max. 5000 mm
Length (L):
min. 1700 mm – max. 5000 mm
